MOTOGADGET Motoscope Pro Dashboard, ABE

The motoscope pro is the latest digital dashboard generation from motogadget. The instrument has an ABE and does not need to be registered. Cutting edge technology makes an ultra-flat package design possible.734 LEDs, controlled by a 16bit Risc processor, form the almost completely self-illuminating display matrix. It ensures optimum readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. An analog LED band with drag pointer function indicates the speed in a freely scalable manner. The main and secondary displays are self-configurable. A further display area shows the engaged gear.Four indicator lights are already integrated and can be used for far more input signals with the help of the display indicator. The breakout box A or B is additionally required for the connection wiring of the control lamps and/or the measurement inputs. See tab 'Breakout Boxes' above. The motoscope pro has a complete CAN bus interface and is thus prepared for many future developments of Plug 'n Ride solutions. See e.g. Breakout Box Triumph.The dashboard communicates via its own digital single-wire bus (mo.BUS) with additional breakout boxes that simply extend the range of functions. Therefore the dashboard is extremely versatile and can be adapted to many vehicles and applications.The aluminium housing is milled from solid material, anodized and can be easily fixed by two rear threaded bushes.Technical data and functions:Length/Width/Depth: 109 mm/ 47 mm/ 11 mmWeight with cable: approx. 100 gFastening: 2 x M3 threaded bushingCurrent consumption in operation: max. 200 mA (load-dependent)Current consumption in idle state: 0.4 mAOperating voltage: 9 V - 15 VOperating temperature: -20° +80°CTachometer (LED band) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)Tachometer = 0 350 km/h o. mphDaily mileage counter A &amp B = up to 999.9 km or miTotal mileage (adjustable) = up to 250000 km or miOperating hours counter/Service = 0 9999.5 hClock = 23:59 h/minDriving time display = 0 99:59:59 h/min/sTachometer (on LCD) = 0 20000 rpmAdjustable speed warning (switching flash) = 0 20000 rpmOn-board voltage display = 9 18 VUndervoltage warning = Warning if under approx. 11VTime measurement = 0 - 100 km/h o. 0 - 60 mph 0.00 30.59 sec. Momentary acceleration = +/- 0.00 1.50 GAverage speed = 0 350 km/h o. mphMaximum value speed = 0 350 km/h o. mphMax. value speed = 0 20000 rpmmax. positive acceleration = +1.50 Gmax. negative acceleration = - 1.50 GGear indicator = N, gear 1 - 6green control LED (with breakout box A/B) = idle (N)green control LED (with breakout box A/B) = turn signal left, rightblue control LED (with breakoutbox A/B) = high beamred warning LED (with breakoutbox A/B) = various warning functionspetrol/reserve (with breakoutbox A/B) = 0 - 100% with low warningair temperature* (with breakoutbox B) = -20 - 80 °C / - -4 - 176 °F with high/low warningwater temperature* (with breakout box B) = 40 - 120 °C / 104 - 248 °F with high/low warningoil temperature* (with breakout box B) = 40 - 150 °C / 104 - 302 °F with high/low warningoil pressure* (with breakout box B) = 0,5 - 8 bar / 0 - 116 psi with high/low warningscope of supply:motoscope pro with ca. 70 cm connection cableTachometer sensor M5 x 0.5 fine thread (stainless steel, IP67) with approx. 150 cm connection cable2 magnets10 x cable end connectorsflying fuse2 stainless steel fixing screwsdetailed mounting and operating instructions.Note:- Touch sensor is no longer included.- Please order the Breakout Box for connecting control lamps (see Breakout Box Std.) or to digital bus systems (Triumph, H-D) additionally. No breakout box required for BMW R9T.